Test and Measurement

Ampetronic provides a range of products to test, measure and monitor induction loop systems to ensure they comply with the international Standard. We have added to the range with the launch of the R1 Receiver, a high quality audio induction loop receiver with a vertically mounted pick up coil designed to be used in conjunction with the Loopworks Measure iOS App. The Loopworks Measure App and R1 Receiver together become the most accurate, dedicated field strength meter (FSM) available.

Ampetronic has the equipment and accessories to facilitate any installation. Remember, you will need to design your loop layout first; if you need support doing this contact Jands today.  

We offer free Hearing Loop advice, estimation, and Standard system design service, so don’t delay – contact us for help or a quotation today.

FSM - Field Strength Meter

The FSM is a cost effective and simple solution for measuring, setting up and commissioning an induction loop system to the requirements of IEC60118-4. The meter is an ergonomically designed hand held instrument for measuring loop system performance.   

find out more ...

R1 Induction Loop Receiver

The R1 Receiver is a high quality audio induction loop receiver with a vertically mounted pick up coil designed to be used in conjunction with the Loopworks Measure iOS App. The Loopworks Measure App and R1 Receiver together become the most accurate, dedicated field strength meter (FSM) available.  

find out more ...

ILR3 Audio Induction Loop Receiver

The ILR3 is a high quality audio induction loop receiver which allows the user to listen to an audio frequency induction loop system using a standard pair of stereo headphones (supplied).  

find out more ...

ILR3-PLUS - Loop Receiver & Field Strength Indicator

The Ampetronic ILR3+ is designed to perform the same induction receiver function as the ILR3 whilst also providing the added capability to check that the induction loop is functioning correctly. 

find out more ...

Bookmark and Share