Ampetronic Field Strength Meter with Signal Connection Cables

Product Code: AMP-FSM+SCC

5 2500 KAMP AMP-FSM+SCC

Where to buy

  • Product Description
  • Features
  • Warranty
Field Strength Meter with Signal Connection Cables
The meter is supplied in a soft case with an audio CD with the required test signals, and full operating instructions including a guide to commissioning. The Ampetronic FSM can be used to monitor, set up or commission any induction loop system regardless of the manufacturer or type.

Applications include:
  • Accurate set-up and commissioning
  • System monitoring and maintenance
  • Site surveys
  • Certification to IEC60118-4:2006
  • Assessment of frequency losses due to metal
  • Assessment of loop coverage and overspill
  • Assessment of background noise
Signal Connection Cables:
The cables allow connection from an audio source on a 3.5mm stereo jack socket such as a headphone output commonly found on most portable audio devices and laptops. They are intended to interface to a wide range of typical inputs and provide appropriate attenuation where applicable.
Signal Connection Cables:
  • Line level input - on twin (stereo) phono (RCA / pin jack) connectors.

  • Line level input - on 6.3mm (¼) 2-pole jack connector with adaptor provided.

  • Balanced Microphone input - using XLR connector (30dB attenuation).

  • Electret Microphone input on 3.5mm 2-pole jack connector (30dB attenuation).

  • FSM:
  • Simple assessment of any system to
  • IEC60118-4
  • Three modes of operation for three test types
  • A-Weighted background noise
  • Broad band mode (50Hz - 8kHz)
  • Frequency response (100Hz, 1kHz, 5kHz)
  • True RMS detection calibrated to
  • 400mA/m = 0dB
  • Wide viewing angle LED display
  • Colour coded LEDs for simple readout
  • Resolution to 1dB
  • Head phone output with volume control
  • Ergonomic, rugged, light weight construction
  • Test signals supplied on CD
  • Soft carry case
  • 5 year warranty
5 Years Std Parts & Labour